AC380V AC Servo Drive Controller

1、Servo drives are used for energy-saving transformation of horizontal injection molding machines, vertical injection molding machines, die-casting machines, blow molding machines, hydraulic presses, punching machines and other equipment represented by hydraulic power, and the power saving effect can reach 25-65%;

2、 Features of injection molding machine servo drives

1. Introducing the excellent performance of vector control technology into the energy-saving field of injection molding machines, completely solving the problem of the past V/F control method affecting the production cycle, and at the same time improving the power saving rate, which is 5%-10% higher than the V/F system.

2. Processing both pressure and flow signals at the same time solves the problem of unstable pressure when using a single signal at low flow and high pressure.

3. The signal conversion board uses a Hall module to completely isolate the 0-1A pressure and flow signals of the injection molding machine electrically and then give feedback to the frequency converter, and can also directly connect to a 0-10v signal. It will not interfere with the industrial computer and affect product quality.

4. Low-frequency torque is large (150%), overload capacity is strong (250%), and it can start quickly. It will not trip under heavy load impact such as high pressure during injection, ensuring product quality without affecting the production cycle.

5. IP54 protection level, fully enclosed design, cabinet type and wall-mounted dual-purpose, dustproof, gas-proof, corrosion-proof, strong environmental adaptability, and extended equipment life.

6. It has automatic reset and power-off reset functions to ensure continuous production and production efficiency.

7. Filter devices are added to the input and output ends, and the anti-interference ability is strong. Strong and weak current are separated for routing, fully considering safety regulations.

8. Built-in PID regulator, when realizing constant pressure and constant temperature control, it is very convenient to realize closed-loop system control of process quantities such as temperature, pressure, and flow.

9. The full series of independent air duct design ensures good heat dissipation of the inverter while greatly improving the environmental adaptability of the product

The product categories that RAVCH can design and manufacture cannot be fully displayed in the limited space. Contact us to learn more about our capabilities and serve you more comprehensively.